AIM RPM Bridge

    Excl. Tax: £165.00 Incl. Tax: £198.00

    Quick Overview

    ECU Bridge and RPM Bridge: these two systems are needed whenever engine data are to be visualized on a display or on a SmartyCam video, if no recording is required.



    They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP. ECU Bridge is to be used in case the Engine Control Unit transmits data in the following hardware protocols: OBDII, CAN or RS232.

    AIM RPM Bridge

    • AIM RPM Bridge
    • AIM RPM Bridge
    • AIM RPM Bridge

    PRODUCT SPECIFICATION

    Aim ECU Bridge and Aim RPM Bridge: these two systems are needed whenever engine data are to be visualized on a display or on a SmartyCam video, if no recording is required.

    They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP. ECU Bridge is to be used in case the Engine Control Unit transmits data in the following hardware protocols: OBDII, CAN or RS232.

    AiM has developed hundreds of different protocols, to make compatibility with virtually all ECUs possible, either stock and after market ECUs. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECUs on the other side.

    ECU Bridge is available in two variants:
    • With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECUs
    • With CAN/RS232 connection, for direct installation on aftermarket ECUs.

    RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars). In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system.

    RPM Bridge is an interface designed to allow RPM overlay on SmartyCam HD videos when the car has got no engine control unit (ECU): this can happen with classic cars or particular car categories.

    RPM data are obtained with connection to the coil. RPM Bridge can as well be useful to get RPM data when ECU has got no data line CAN/K Line/RS232: in this case data are obtained with connection to the square wave signal coming from that kind of ECU. RPM Bridge allows visualisation but not recording of RPM data.

    Additional Information

    Vio No
    Stack No
    Race Technology No
    Racerender No
    Racekeeper No
    Qstarz No
    Go Pro No
    Dogcam No
    Goldstar No
    Chasecam PDR100 No
    Chasecam Diva HD No
    Chasecam Diva No
    Aim Cable/Accessories
    dvd No
    memory card No
    V Box Waterproof No
    Youtube Video No