AIM Solo 2 GPS lap timer

    Excl. Tax: £300.00 Incl. Tax: £360.00

    Quick Overview

    Aim Solo 2 Lap timer

    The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.

    AIM Solo 2 GPS lap timer

    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer
    • AIM Solo 2 GPS lap timer

    PRODUCT SPECIFICATION

     
     
    Aim Solo 2


    Aim SOLO 2 GPS Lap Timer

     

    “the most precise and easy way to get lap times”

    Aim Solo 2 GPS image

    The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.

    Aim Solo 2 screen can be backlit in one of the seven available colors:

    Solo 2 can be backlit seven colors

    Find your track easily and quickly

    Aim Solo 2 Find your track easily

    Solo 2 can rely on a database of more than 3,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times. In the event that the track is not in the database then no problem. Solo 2 realises it and enters into the autolearning mode, automatically understands the characteristics of the track
    and gives the lap time anyway.

    Even the Predictive Lap Time is Much More Reliable

    Solo2 LED Display, Even the predictive lap time is much more reliable and the Solo 2 configurable RGB LEDs will give you a clear and fast indication of the comparison with your best lap.

    The Aim Solo 2 configurable RGB LEDs, will give you a clear and fast indication of the comparison with your best lap.

    Solo 2 Race Mode Selection

    Solo 2 Race Mode Selection

    Solo 2 can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session.

    Solo 2 Race Data Recall on Screen

    Solo 2 Race Data Recall

    At the end of your test, you can quickly review all the key information on your display.

    Solo 2 Wi-Fi Communication with the PC

    Solo 2 Wi-Fi Communication

    Wi-Fi connection is easy and fast without connectors or cables,
    Simply the best way to configure your Solo 2, to manage the track database and to download the data to your PC.

    iPhone Connection

    Solo 2 Find your track easily

    Use your iPhone for a quick and comfortable  data analysis, for managing the track database and even for an On-Line view of the most important parametersof your Engine  (in case you have chosen the Solo 2 DL).

    In the event that the track is not in the database then no problem. Solo 2 realises it and enters into the autolearning mode, automatically understands the characteristics of the trackand gives the lap time anyway.

    Solo 2 DL, with ECU Connection

    Solo 2 DL with ECU Connection

    There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit providing you a lot of information with just one cable.

    Where your ECU protocol is not in the database, an ECU Driver Builder is always available in the Race Studio 3 configuration software which you will be able to create your protocol by yourself.

    Coil RPM input
    Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).

    SmartyCam HD connection

    Solo 2 and Smartycam Connections
    Solo 2 and Smartycam

    The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.

    Additional Information

    Vio No
    Stack No
    Race Technology No
    Racerender No
    Racekeeper No
    Qstarz No
    Go Pro No
    Dogcam No
    Goldstar No
    Chasecam PDR100 No
    Chasecam Diva HD No
    Chasecam Diva No
    Aim No
    dvd No
    memory card No
    V Box Waterproof No
    Youtube Video No